USB C Sensor Node
Worked for 44 sec
Thought for 18 sec — Choosing components for low-power MCU
Found 3 results for Find Flux library USB input eFuse or protection switch IC for 5 V USB-C sink with adjustable/current limit around 0.75 to 1 A, overvoltage protection threshold above normal USB 5.25 V and below 9 V, undervoltage lockout, reverse current blocking, soft-start/inrush control, active SMD part. Prefer TI TPS2595 TPS2596 TPS2594 AP2265 AP22802 style eFuse..
Found 10 results for TPS2595.
Found 10 results for TPS2596.
Found 2 results for AP22652.
Found 4 results for NCP361.
Thought for 19 sec
Thought for 16 sec
Reading SIWG917Y111MGABAR, SHT41-AD1B-R2, USB4105-GF-A, TPS259621DDAR, MP28301GG-Z, USBLC6-2SC6, ESD5341N datasheets.
Thought for a moment
Assessing developer requirements
I need to follow the developer's instructions exactly. However, it seems the results are missing the pinout or footprint, which likely means the drawing isn't capturing the details properly—it's probably not using OCR. I should search more thoroughly to find information about GF-A. It's clear that I need to dig deeper to ensure I get the right information and meet the requirements correctly. Let's stay focused on that!
Thought for 5 sec
I established the high-level architecture: USB‑C 5 V sink, reverse/OVP/UVLO/OCP protection, efficient 3.3 V buck rail, certified low-power Wi‑Fi/BLE 5.x module, and digital temperature/humidity sensor.
No schematic components or nets have been added yet, and I couldn’t inspect the attached file because no ACUs are currently available. Remaining work is to review the attachment, finalize part selection and power budget, capture the schematic, then run ERC and design verification.
Add power protection
Choose core components
Review uploaded requirements
Power path and sourcing
No schematic yet
Talk to Flux to get started.