# Arduino Nano Barebones - SMD gamH 20f8 ## Description Important Note: You must connect your own SPI/ICSP programming header if you want to burn the Arduino bootloader to the MCU. SMD Manufacturing: Need a hotplate and solderpaste Good to haves: - Oscillator Decoupling Caps Expose UART via connector Programming Button Onboard LED Reset Button You don't have to populate everything! Only these are mandatory: Reset Button Find the reference schematic here: https://www.arduino.cc/en/uploads/Main/ArduinoNano30Schematic.pdf ## Project Details - **Owner:** agovardhanpcbdesigner - **Created:** 7/11/2024 - **Last Updated:** 12/14/2024 - **Visibility:** Public --- *Generated from [https://www.flux.ai/agovardhanpcbdesigner/arduino-nano-barebones-smd-gamh-20f8](https://www.flux.ai/agovardhanpcbdesigner/arduino-nano-barebones-smd-gamh-20f8)*