ESP32-S3 Air Quality Logger

flux

1:34

Planning user request.

Proposing high-level steps.

Detailing component requirements.

Identifying ambiguities.

Accessing knowledge base.

Clarifying plan essentials.

You want an ESP32-S3 air-quality logger with dual SPS30, BME680, OPC-N3, microSD, RTC, and a SIMCom 2G–5G module. I’ve prepared a plan that’s ready to run:

Core and comms: add ESP32-S3, SIMCom cellular module, nano‑SIM holder, MicroSD Card Socket, RTC, and USB‑C.
Sensors: add connectors for two SPS30, one BME680, and OPC-N3; choose I2C/UART per device.
Power: create 5 V and 3.3 V rails sized for Wi‑Fi and cellular peaks (>200 mA), plus EMI/ESD protection.
Wiring/layout: assign SPI/I2C/UART, add 4.7k I2C pull‑ups and keep total bus capacitance ≤ 400 pF, route with RF keep‑outs and decoupling.
Verify/release: run ERC/DRC, check part availability, generate BOM and manufacturing files.

Click Start to execute this plan, or tell me what you’d like to change.

Plan

#Goal

Design and build an ESP32-S3 air-quality data logger that integrates two SPS30 sensors, one BME680, and one Alphasense OPC-N3 for comprehensive air quality monitoring. The design will include microSD logging, an RTC with coin-cell backup, and a SIMCom cellular module (supporting 2G to 5G with high-speed transmission). Additionally, ensure the I2C bus uses 4.7k pull-ups with total bus capacitance below 400 pF and size power supplies to handle Wi-Fi and cellular burst currents exceeding 200 mA.

#Implementation plan

Core Compute and Communication 1.1. Select and add an ESP32-S3 module as the central MCU. 1.2. Select and add a SIMCom cellular module (2G to 5G capable) along with a nano-SIM holder and RF connectors. 1.3. Integrate a microSD card socket via SPI for data logging. 1.4. Add an RTC with coin-cell backup for accurate timekeeping. 1.5. Include a USB-C connector for power and debugging.
Sensor and Interface Integration 2.1. Select and add connectors for two SPS30 sensors ensuring proper I2C/UART assignment. 2.2. Select and add a connector for the BME680 sensor, and configure its interface. 2.3. Select and add a connector for the Alphasense OPC-N3 sensor and assign a suitable communication interface. 2.4. Add required 4.7k I2C pull-ups and verify that total I2C bus capacitance remains below 400 pF.
Power Supply and Regulation 3.1. Design and add 5 V and 3.3 V power rails accommodating Wi-Fi and cellular current peaks (>200 mA). 3.2. Incorporate EMI filtering and ESD protection circuits.
Signal Routing and Layout 4.1. Assign operating pins on the ESP32-S3 for SPI, I2C, and UART interfaces. 4.2. Determine and make connections between ESP32-S3 and peripheral sensors/modules. 4.3. Ensure proper routing of high-speed and RF signals with antenna keep-out areas. 4.4. Add decoupling capacitors and test points across critical nodes.
Design Verification and Documentation 5.1. Run ERC (Electrical Rule Check) and DRC (Design Rule Check) to verify connectivity and layout integrity. 5.2. Validate parts availability and performance capability for all key components. 5.3. Generate final BOM and manufacturing files for production.

#Success criteria

The schematic includes ESP32-S3, SIMCom, microSD, RTC, two SPS30 sensors, BME680, and alphasense OPC-N3 with correct connections.
I2C pull-ups are correctly implemented at 4.7k and bus capacitance is maintained under 400 pF.
Power rails meet current handling requirements, and the design passes ERC/DRC checks with a validated BOM.

Pick cellular module

Confirm sensor interfaces

Size power rails

Add I2C pullups

Choose connectors

73 days

kcdc

@library find a SIMCom module that supports LTE Cat-1 or Cat-4, plus ESP32-S3 UART/USB interface.

73 days

flux

2:54

Sorry, something went wrong. Please try again later.

73 days

Reviews

Ground
A common return path for electric current. Commonly known as ground.
jharwinbarrozo
20.5M
Net Portal
Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
jharwinbarrozo
43.0M
Power Net Portal
Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
jharwinbarrozo
11.4M
Generic Resistor
A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Capacitor
A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
jharwinbarrozo
1.5M
Generic Inductor
A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
jharwinbarrozo
15.8k
Terminal
An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
natarius
RMCF0805JT47K0
47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film #forLedBlink
jharwinbarrozo
1.2M
875105359001
10uF Capacitor Aluminum Polymer 20% 16V SMD 5x5.3mm #forLedBlink #commonpartslibrary #capacitor #aluminumpolymer #radialcan
jharwinbarrozo
1.2M
CTL1206FYW1T
Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric) #forLedBlink
jharwinbarrozo
1.1M

Project Name

ESP breakout board

Description

ESP32 breakout board with DHT11 sensor and

Properties

Properties describe core aspects of the project.

Pricing & Availability

Distributor	Qty 1
Digi-Key	$4.80
LCSC	$2.19

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

agarci317 / ESP breakout board

Schematic