Part Review and Datasheet Update
Worked for 3 mins 51 sec
Completed the part review and updated the Datasheet URL to the official Abracon ABM8G PDF: https://abracon.com/Resonators/ABM8G.pdf. The symbol pin roles and footprint geometry match the datasheet; the only issues flagged are unspecified symbol pin types and a redundant terminal-level Datasheet URL added during the update attempt.
Full report: Part Review: ABM8G-24.000MHZ-18-D2Y-T
Suggested next steps:
- Clean up the redundant XTAL_1 terminal Datasheet URL property.
- Set pin types explicitly for pins 1/3 and 2/4.
- Add any missing parametric properties such as frequency, load capacitance, ESR, tolerance, and stability.
Thought for 6 sec
I’ll remove the redundant terminal datasheet field, set clearer terminal pin types, add the key crystal properties, then run ERC/DRC to verify the part.
Worked for 1 min 35 sec
Completed the cleanup: removed the redundant terminal-level Datasheet URL, set XTAL pins to Passive and case pads to Ground, added key parametric properties (24 MHz, 18 pF, 60 Ω, 20 ppm, −40 to 85 °C, plus implementation details), and ran ERC/DRC.
Open items:
- ERC/DRC returned no ERROR/WARNING/UNCERTAIN/OPEN findings.
- Note: the part-level Datasheet URL still appears as the uploaded PDF in project metadata, though the official Abracon URL was previously added as a project property; Flux may be preserving the original managed datasheet asset field separately.
Suggested next steps:
- Publish/update the part version if this library cleanup is ready.
- Optionally add stability (±30 ppm) and drive level as separate searchable fields if your part schema supports them.
Publish and export
Publish updated part
Export STEP preview
Generate verification report
Add extra fields
