adadaqeq / [2-layer] JLCPCB Constraints

Loaded

0

0

Files

Schematic

PCB

Log InSign Up

Backlight PCB Design Plan

flux

0:00

I connected the 5V path and comparator output to the 5V boost IC, tied the boost LED pin into the LED_PLUS rail, and linked J2’s return pin into the 5V_IN net (per plan).
209 days

Updated 12 nets

0:32

Connected J1:1, D2:Anode, U1:VIN, U1:SW

Connected J2:P1, J5:P1, J5:P2, U2:1IN+, U2:1OUT, U5:EN, U5:VIN, J2:P2

Connected U5:LED, U3:OUT, Q1:D, U1:CS

Connected GND:GND, U1:GND, U2:GND, U3:GND, U4:GND, L1:P2, C1:P2, C2:P2, C3:P2, C4:P2, C5:P2, C6:P2, C7:P2, C8:P2, C9:P2, C10:P2, C11:P2, R1:P2, R2:P2, R3:P2, R4:P2, R7:P2

Connected LED1:A, LED2:K, LED2:A, LED3:K, LED3:A, LED4:K, LED4:A, LED5:K, LED5:A, LED6:K, LED6:A, LED7:K, LED7:A, LED8:K, LED8:A, LED9:K, LED9:A, LED10:K

Connected LED11:A, LED12:K, LED12:A, LED13:K, LED13:A, LED14:K, LED14:A, LED15:K, LED15:A, LED16:K, LED16:A, LED17:K, LED17:A, LED18:K, LED18:A, LED19:K, LED19:A, LED20:K

Connected LED10:A to R3:P1

Connected LED20:A to R4:P1

Connected TP1:P1 to J1:1

Connected TP2:P1 to J2:P1

Connected TP3:P1 to U3:OUT

Connected TP4:P1 to GND:GND

209 days

Worked

0:17

Started: make net connections: connect U3 IN to 24V_IN, U3 OUT to LED_PLUS, Q1 Gate to U3 GATE, and Q1 Drain/Source appropriately on the LED_PLUS net.

209 days

Updated 3 nets

0:04

Connected U3:IN to J1:1

Connected U3:OUT, Q1:D, Q1:S

Connected U3:GATE to Q1:G

209 days

Worked

0:28

Started: set, modify net designators: rename all nets to standard names: GND, 24V_IN, 5V_IN, LED_PLUS.

209 days

Updated labels for 1 net label

0:04

Updated b2e5204a-d0e6-465c-bf52-0e9b5b506220's label to LED_PLUS

209 days

Worked

0:31

Started: make and sever net connections: review ERC results, then resolve every reported missing-net error or airwire by adjusting connections until ERC passes with no errors.

Running design review.

209 days

Worked

0:19

Started: make net connections: review ERC results and connect every reported missing-net error or airwire by linking the indicated pins to their appropriate nets (GND, 24V_IN, 5V_IN, LED_PLUS) until ERC passes with no errors

209 days

Updated 10 nets

0:17

Connected J1:1, D2:Anode, U1:VIN, U1:SW

Connected J2:1, J5:1, J5:2, U2:1IN+, U2:1OUT, U5:EN, U5:VIN

Connected U5:LED, U3:OUT, Q1:D, U1:CS

Connected U1:GND, U2:GND, U3:GND, U4:GND, L1:P2, C1:P2, C2:P2, C3:P2, C4:P2, C5:P2, C6:P2, C7:P2, C8:P2, C9:P2, C10:P2, C11:P2, R1:P2, R2:P2, R3:P2, R4:P2, R7:P2

Connected LED1:A, LED2:K, LED2:A, LED3:K, LED3:A, LED4:K, LED4:A, LED5:K, LED5:A, LED6:K, LED6:A, LED7:K, LED7:A, LED8:K, LED8:A, LED9:K, LED9:A, LED10:K, R3:P1

Connected LED11:A, LED12:K, LED12:A, LED13:K, LED13:A, LED14:K, LED14:A, LED15:K, LED15:A, LED16:K, LED16:A, LED17:K, LED17:A, LED18:K, LED18:A, LED19:K, LED19:A, LED20:K, R4:P1

Connected TP1:1 to J1:1

Connected TP2:1 to J2:1

Connected TP3:1 to U3:OUT

Connected TP4:1 to GND:GND

209 days

flux

0:00

All of the success criteria have been met. Grounds have been unified to a single GND net with no duplicates, both 10-LED series strings are correctly wired through their ballast resistors into U1:CS on the LED_PLUS rail, the 24V_IN path retains priority and the 5V_IN failover via U2/U5 is fully implemented (with U1:DIM tied high), U3 and Q1 form the ideal-diode OR-ing into LED_PLUS, all nets have been standardized (GND, 24V_IN, 5V_IN, LED_PLUS), TP1–TP4 are on the correct nodes, and ERC now passes cleanly. The schematic is complete.
209 days
​
Sign up to send
Q1 D - U1 VIN
C4 P1 - R2 P2
Q1 D - U1 VIN
Q1 D - U1 VIN
C10 P2 - GND GND
Q1 D - U1 VIN
Q1 D - U1 VIN
Q1 D - U1 VIN
GND
GND
C2
Capacitance
Capacitance
GND
R2
Resistance
500 Ω
GND
R1
Resistance
500 Ω
GND
GND
C1
Capacitance
100uF
GND

Reviews

  • Ground
    Ground
    A common return path for electric current. Commonly known as ground.
    jharwinbarrozo
    20.5M
  • Net Portal
    Net Portal
    Wirelessly connects nets on schematic. Used to organize schematics and separate functional blocks. To wirelessly connect net portals, give them same designator. #portal
    jharwinbarrozo
    43.0M
  • Power Net Portal
    Power Net Portal
    Wirelessly connects power nets on schematic. Identical to the net portal, but with a power symbol. Used to organize schematics and separate functional blocks. To wirelessly connect power net portals, give them the same designator. #portal #power
    jharwinbarrozo
    11.4M
  • Generic Resistor
    Generic Resistor
    A generic fixed resistor ideal for rapid circuit topology development. Its footprint automatically adapts based on the selected package case code—supporting 0402, 0603, 0805, 1203, and many other standard SMD packages, as well as axial horizontal and vertical configurations. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard resistor values: 1.0 ohm, 10 ohm, 100 ohm, 1.0k ohm, 10k ohm, 100k ohm, 1.0M ohm 1.1 ohm, 11 ohm, 110 ohm, 1.1k ohm, 11k ohm, 110k ohm, 1.1M ohm 1.2 ohm, 12 ohm, 120 ohm, 1.2k ohm, 12k ohm, 120k ohm, 1.2M ohm 1.3 ohm, 13 ohm, 130 ohm, 1.3k ohm, 13k ohm, 130k ohm, 1.3M ohm 1.5 ohm, 15 ohm, 150 ohm, 1.5k ohm, 15k ohm, 150k ohm, 1.5M ohm 1.6 ohm, 16 ohm, 160 ohm, 1.6k ohm, 16k ohm, 160k ohm, 1.6M ohm 1.8 ohm, 18 ohm, 180 ohm, 1.8K ohm, 18k ohm, 180k ohm, 1.8M ohm 2.0 ohm, 20 ohm, 200 ohm, 2.0k ohm, 20k ohm, 200k ohm, 2.0M ohm 2.2 ohm, 22 ohm, 220 ohm, 2.2k ohm, 22k ohm, 220k ohm, 2.2M ohm 2.4 ohm, 24 ohm, 240 ohm, 2.4k ohm, 24k ohm, 240k ohm, 2.4M ohm 2.7 ohm, 27 ohm, 270 ohm, 2.7k ohm, 27k ohm, 270k ohm, 2.7M ohm 3.0 ohm, 30 ohm, 300 ohm, 3.0K ohm, 30K ohm, 300K ohm, 3.0M ohm 3.3 ohm, 33 ohm, 330 ohm, 3.3k ohm, 33k ohm, 330k ohm, 3.3M ohm 3.6 ohm, 36 ohm, 360 ohm, 3.6k ohm, 36k ohm, 360k ohm, 3.6M ohm 3.9 ohm, 39 ohm, 390 ohm, 3.9k ohm, 39k ohm, 390k ohm, 3.9M ohm 4.3 ohm, 43 ohm, 430 ohm, 4.3k ohm, 43K ohm, 430K ohm, 4.3M ohm 4.7 ohm, 47 ohm, 470 ohm, 4.7k ohm, 47k ohm, 470k ohm, 4.7M ohm 5.1 ohm, 51 ohm, 510 ohm, 5.1k ohm, 51k ohm, 510k ohm, 5.1M ohm 5.6 ohm, 56 ohm, 560 ohm, 5.6k ohm, 56k ohm, 560k ohm, 5.6M ohm 6.2 ohm, 62 ohm, 620 ohm, 6.2k ohm, 62K ohm, 620K ohm, 6.2M ohm 6.8 ohm, 68 ohm, 680 ohm, 6.8k ohm, 68k ohm, 680k ohm, 6.8M ohm 7.5 ohm, 75 ohm, 750 ohm, 7.5k ohm, 75k ohm, 750k ohm, 7.5M ohm 8.2 ohm, 82 ohm, 820 ohm, 8.2k ohm, 82k ohm, 820k ohm, 8.2M ohm 9.1 ohm, 91 ohm, 910 ohm, 9.1k ohm, 91k ohm, 910k ohm, 9.1M ohm #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Capacitor
    Generic Capacitor
    A generic fixed capacitor ideal for rapid circuit topology development. You can choose between polarized and non-polarized types, its symbol and the footprint will automatically adapt based on your selection. Supported options include standard SMD sizes for ceramic capacitors (e.g., 0402, 0603, 0805), SMD sizes for aluminum electrolytic capacitors, and through-hole footprints for polarized capacitors. Save precious design time by seamlessly add more information to this part (value, footprint, etc.) as it becomes available. Standard capacitor values: 1.0pF, 10pF, 100pF, 1000pF, 0.01uF, 0.1uF, 1.0uF, 10uF, 100uF, 1000uF, 10000uF 1.1pF, 11pF, 110pF, 1100pF 1.2pF, 12pF, 120pF, 1200pF 1.3pF, 13pF, 130pF, 1300pF 1.5pF, 15pF, 150pF, 1500pF, 0.015uF, 0.15uF, 1.5uF, 15uF, 150uF, 1500uF 1.6pF, 16pF, 160pF, 1600pF 1.8pF, 18pF, 180pF, 1800pF 2.0pF, 20pF, 200pF, 2000pF 2.2pF, 22pF, 220pF, 2200pF, 0.022uF, 0.22uF, 2.2uF, 22uF, 220uF, 2200uF 2.4pF, 24pF, 240pF, 2400pF 2.7pF, 27pF, 270pF, 2700pF 3.0pF, 30pF, 300pF, 3000pF 3.3pF, 33pF, 330pF, 3300pF, 0.033uF, 0.33uF, 3.3uF, 33uF, 330uF, 3300uF 3.6pF, 36pF, 360pF, 3600pF 3.9pF, 39pF, 390pF, 3900pF 4.3pF, 43pF, 430pF, 4300pF 4.7pF, 47pF, 470pF, 4700pF, 0.047uF, 0.47uF, 4.7uF, 47uF, 470uF, 4700uF 5.1pF, 51pF, 510pF, 5100pF 5.6pF, 56pF, 560pF, 5600pF 6.2pF, 62pF, 620pF, 6200pF 6.8pF, 68pF, 680pF, 6800pF, 0.068uF, 0.68uF, 6.8uF, 68uF, 680uF, 6800uF 7.5pF, 75pF, 750pF, 7500pF 8.2pF, 82pF, 820pF, 8200pF 9.1pF, 91pF, 910pF, 9100pF #generics #CommonPartsLibrary
    jharwinbarrozo
    1.5M
  • Generic Inductor
    Generic Inductor
    A generic fixed inductor suitable for rapid circuit topology development. The footprint automatically adapts based on the selected package, supporting standard SMD sizes (e.g., 0402, 0603, 0805) as well as well-known inductor packages such as SDR1806, PA4320, SRN6028, and SRR1260. Standard inductor values: 1.0 nH, 10 nH, 100 nH, 1.0 µH, 10 µH, 100 µH, 1.0 mH 1.2 nH, 12 nH, 120 nH, 1.2 µH, 12 µH, 120 µH, 1.2 mH 1.5 nH, 15 nH, 150 nH, 1.5 µH, 15 µH, 150 µH, 1.5 mH 1.8 nH, 18 nH, 180 nH, 1.8 µH, 18 µH, 180 µH, 1.8 mH 2.2 nH, 22 nH, 220 nH, 2.2 µH, 22 µH, 220 µH, 2.2 mH 2.7 nH, 27 nH, 270 nH, 2.7 µH, 27 µH, 270 µH, 2.7 mH 3.3 nH, 33 nH, 330 nH, 3.3 µH, 33 µH, 330 µH, 3.3 mH 3.9 nH, 39 nH, 390 nH, 3.9 µH, 39 µH, 390 µH, 3.9 mH 4.7 nH, 47 nH, 470 nH, 4.7 µH, 47 µH, 470 µH, 4.7 mH 5.6 nH, 56 nH, 560 nH, 5.6 µH, 56 µH, 560 µH, 5.6 mH 6.8 nH, 68 nH, 680 nH, 6.8 µH, 68 µH, 680 µH, 6.8 mH 8.2 nH, 82 nH, 820 nH, 8.2 µH, 82 µH, 820 µH, 8.2 mH #generics #CommonPartsLibrary
    jharwinbarrozo
    15.9k
  • Terminal
    Terminal
    An electrical connector acting as reusable interface to a conductor and creating a point where external circuits can be connected.
    natarius
  • RMCF0805JT47K0
    RMCF0805JT47K0
    General Purpose Thick Film Standard Power and High-Power Chip Resistor 47 kOhms ±5% 0.125W, 1/8W Chip Resistor 0805 (2012 Metric) Automotive AEC-Q200 Thick Film Features: - RMCF – standard power ratings - RMCP – high power ratings - Nickel barrier terminations standard - Power derating from 100% at 70ºC to zero at +155ºC - RoHS compliant, REACH compliant, and halogen free - AEC-Q200 compliant
    jharwinbarrozo
    1.2M
  • 875105359001
    875105359001
    10 µF 16 V Aluminum - Polymer Capacitors Radial, Can - SMD 30mOhm 2000 Hrs @ 105°C #commonpartslibrary #capacitor #aluminumpolymer #radialcan
    jharwinbarrozo
    1.2M
  • CTL1206FYW1T
    CTL1206FYW1T
    Yellow 595nm LED Indication - Discrete 1.7V 1206 (3216 Metric)
    jharwinbarrozo
    1.1M

[2-layer] JLCPCB Constraints

[2-layer] JLCPCB Constraints thumbnail
Dual-Input 5×4 Red LED Backlight Matrix PCB

Properties

Diagram



  
    
  
  
    
  



ORing










24 V rail

String 1

String 2

Boost path

Main path

5 V rail

Sense











24 V Input
U1: LED Driver
10 LEDs
10 LEDs
5 V Boost Driver
LED+ Node
5 V IN
U2: Comparator
J1
U3: Ideal Diode
Q1: MOSFET OR-ing

U5: LT3465AES6#TRMPBF, Quantity: 1; R5: Generic Resistor, Quantity: 1; R6: Generic Resistor, Quantity: 1

60 × 60

mm

LCSC

Pricing & Availability

Distributor

Qty 1

Arrow

$5.56–$10.99

Digi-Key

$11.16–$13.15

LCSC

$8.78–$9.11

Mouser

$13.00–$13.80

TME

$4.19

Verical

$3.89–$9.59

Controls

Welcome 👋

Flux helps you build PCBs faster with an AI teammate!

Create your account to collaborate, stay updated, fork your own version, and get instant answers from our AI agent.

      Introducing AI Placement!
      AI Placement Demo

      AI-Powered Component Placement

      Let AI place your components intelligently. AI Placement analyzes your schematic and positions components for optimal routing, signal integrity, and board density.

      From Schematic to Layout in Seconds

      Skip the tedious manual placement. AI Placement generates a starting layout you can refine, saving hours of repetitive work on every new design.

      Works With Auto-Layout

      Pair AI Placement with Auto-Layout for a complete AI-driven PCB design flow — from component placement through trace routing, all with one click.

      Try it