# raspberry-pi-2-3-4-model-b-template w2wB ## Description Raspberry Pi 2, 3, 4 or 400 Model B+ connector with RPi board outline and mounting holes. good for Raspberry Pi Shield projects. Insulation Height 0.335" (8.51mm) Compatible part number: PPPC202LFBN-RC #RaspberryPi #HAT #RPi #template #project ## Project Details - **Owner:** abinkj - **Created:** 2/21/2024 - **Last Updated:** 2/21/2024 - **Visibility:** Public ## Key Components ### M1 — [DC Motor](https://www.flux.ai/vasyl/dc-motor~ku.md) **Pins:** - - - + ### M2 — [DC Motor](https://www.flux.ai/vasyl/dc-motor~ku.md) **Pins:** - - - + ### RPi1 — [Raspberry Pi 2 3 4 Model B](https://www.flux.ai/vasy_skral/raspberry-pi-2-3-4-5-model-b~pak.md) - Part Type: Connector **Pins:** - ~CE0~/GPIO8 - ~CE1~/GPIO7 - 3V3 - 3V3 - 5V - 5V - GCLK0/GPIO4 - GCLK1/GPIO5 - GCLK2/GPIO6 - GND - GND - GND - GND - GND - GND - GND - GND - GPIO14/TXD - GPIO15/RXD - GPIO16 - GPIO17 - GPIO18/PWM0 - GPIO19/MISO1 - GPIO20/MOSI1 - GPIO21/SCLK1 - GPIO22 - GPIO23 - GPIO24 - GPIO25 - GPIO26 - GPIO27 - ID_SC/GPIO1 - ID_SD/GPIO0 - MISO0/GPIO9 - MOSI0/GPIO10 - PWM0/GPIO12 - PWM1/GPIO13 - SCL/GPIO3 - SCLK0/GPIO11 - SDA/GPIO2 *The full schematic, PCB layout, bill of materials, and interactive design are available at [https://www.flux.ai/abinkj/raspberry-pi-2-3-4-model-b-template-w2wb~mv](https://www.flux.ai/abinkj/raspberry-pi-2-3-4-model-b-template-w2wb~mv).* --- *Generated from [https://www.flux.ai/abinkj/raspberry-pi-2-3-4-model-b-template-w2wb~mv](https://www.flux.ai/abinkj/raspberry-pi-2-3-4-model-b-template-w2wb~mv)*